Home | Login | Register
DEPARTMENTS
- CORVETTE C5/Z06
- CORVETTE C6/Z06
- GTO
- Specials
- New Products
- Featured Products
- All Products

INFORMATION
- Shipping & Returns
- Contact Us
- Subscribe to Newsletter
- Tell A Friend

 

Home
 
All Products
""Nu-Tec Designs H2 Hummer Flip-Step MAX - "NU-TEC DESIGN�S NEW MAX FLIP-STEP�

Stepping up to a Hummer �step bumper� that is waist high is made possible by Nu-Tec Design�s new MAX Flip-Step�. Designed specifically for the Hummer, this innovative fold-down hitch receiver step provides a solid platform for accessing the cargo area or roof rack. When flipped up the 14-LED array on the face of the step provides a super-bright brake/running light at eye level for drivers following the Hummer. The light simply plugs into the existing trailer wiring.

Nu-Tec Designs is the inventor of the Flip-Step�, a hitch receiver fold-down step that sports a super bright LED brake/running light on the face of the step.

�With SUV step bumpers being 2� to 3� feet off the ground one has to wonder how they can be called �step bumpers� since you need a step just to reach the bumper,� said Flip-Step inventor Bill Schlicht. �The size of these vehicles creates an inherent problem of being unable to reach the roof racks, rear cargo areas or to wash them�, adds Schlicht.

This is particularly true for the Hummer and Nu-Tec Designs set out to create a special step that fit with the styling and quality of the Hummer. The resulting step is the MAX Flip-Step and Hummer owners have welcomed it with much acclaim. With a step plate measuring 6�� x 9�� the MAX provides a substantial and secure step platform with a 500-pound load capacity. When in the folded up position the distinctive styling and LED light creates a polished look and enhances both the functionality and safety of the Hummer."
Products:Exterior
""Optima Yellow Top Dual Post Battery - "The OPTIMA Yellow Top? Deep Cycle Battery should be used in the following cases: 

Starting applications in high-accessory vehicles/High Cycling Applications. Vehicles with computers, extra radios, electronic components, lights, winches, etc. will create excessive amperage drain that can damage a starting battery. Recommend the OPTIMA Yellow Top to provide fast recharging and longer life due to its ability to cycle over 300 times. 

Starting applications with low amperage draws. If your customer has a vehicle that sits unused for long periods of time, either OPTIMA will provide longer life due to reduced corrosion and sulfation. However, if the vehicle has an alarm, computer, or other low amperage drain, the Yellow Top will guard against deep cycling damage that can occur over long periods of time. 

To increase Reserve Capacity or Run Time. You must first identify how long the customer needs to use the battery to run a vehicle, accessory, or motor before without recharging. Each OPTIMA Yellow Top Deep Cycle Battery is rated at 120 minutes of Reserve Capacity at a 25 Amp draw. If your customer is planning on using their OTPIMA in a trolling motor that pulls 50 Amps, they will only get 60 minutes of run time. If they require more run time you need to install multiple batteries in parallel. It is important to understand what the customer expects in order to provide them with the correct OPTIMA solution."
Products:Lighting
""Patriot Stage 2 LS6 Style Heads - "Stage II  1020 Superflow Bench 3.905 Bore
 

       - We use a new GM raw 035 casting.    
       - Precision welded combustion chambers.
       - Heat treated to OEM specs.
       - 5 axis CNC machined.
       - Hand detailed and assembled.
       - 21-4N Stainless Valves
       - Bronze Guides
       - Patriot Gold .650 Dual Springs
       - Titanium Retainers
       - 5 Angle Valve Job
       - Custom chamber sizes available
       - No core required"
Products:Cam And Heads
""Patriot Stage 2 LS6 Style Heads - "Stage II  1020 Superflow Bench 3.905 Bore
 

       - We use a new GM raw 035 casting.    
       - Precision welded combustion chambers.
       - Heat treated to OEM specs.
       - 5 axis CNC machined.
       - Hand detailed and assembled.
       - 21-4N Stainless Valves
       - Bronze Guides
       - Patriot Gold .650 Dual Springs
       - Titanium Retainers
       - 5 Angle Valve Job
       - Custom chamber sizes available
       - No core required"
Products:Cam And Heads
""Patriot Stage 3 LS6 Style Heads - "- We use a new GM raw 035 casting.    
        -Precision welded combustion chambers.
        - Heat treated to OEM specs.
        - 5 axis CNC machined.
        -Hand detailed and assembled.
        -21-4N Stainless Valves
        -Bronze Guides
        -Patriot Gold .650 Dual Springs
        -Titanium Retainers
        -5 Angle Valve Job
        -Custom chamber sizes available
        -No core required

Stage II  1020 Superflow Bench 3.905 Bore"
Products:Cam And Heads
""Patriot Stage 3 LS6 Style Heads - "- We use a new GM raw 035 casting.    
        -Precision welded combustion chambers.
        - Heat treated to OEM specs.
        - 5 axis CNC machined.
        -Hand detailed and assembled.
        -21-4N Stainless Valves
        -Bronze Guides
        -Patriot Gold .650 Dual Springs
        -Titanium Retainers
        -5 Angle Valve Job
        -Custom chamber sizes available
        -No core required

Stage II  1020 Superflow Bench 3.905 Bore"
Products:Cam And Heads
""Paxton 2004 H2 Supercharger System - "Paxton Automotive announces the 2004 6.0L Hummer H2 Supercharging System. The 6.0 engine from the factory produces 316 horsepower and 360 lb./ft. of torque. The addition of the NOVI 1200 supercharger with air to water charge cooler increases horsepower to 436 and torque to 465 lb./ft 

Boost Pressure of 7-8 psig 

NOVI 1200 supercharger with 3.33 drive pulley 

Complete fuel system upgrade includes replacement high-flow fuel injectors 

Hand held programmer to modify timing and fuel enirchment 

Air to water charge cooler system features welded aluminum charge cooler core with discharge tubes, Bosch compressor bypass valve, water storage tank with hoses, clamps and plumbing and a compact water circulation pump for closed loop cooling 

Molded air inlet ducting assembly 

Oil feed and Oil drain assemblies allow for maintenance free operation 

Tools included for simple modification of oil pan for supercharger drain fitting installation 

Billet aluminum supercharger mounting bracket assembly includes idler, spring tensioner, drive belt and all hardware"
Products:Performance
""PC Essentials Detail Kit - "The word, Essentials, didnt fit, so we upgraded our most popular kit. We bumped the Detail Spray Refill from 1/2 Gallon to one full Gallon. We added the Grit Guard Bucket Insert, and upgraded the towels from 3 to 4 of our Brand New Ultra Plush Microfiber Polishing Towels. We also bumped the applicator and detail sponge count to four. This kit, if purchased seperately, would cost $459. If you are looking to take vehicle care seriously, here is where to start.
 
 
Clear 4.25 Gallon Bucket
Screw-Top Sealed Bucket Lid
Detail Spray 
Clay Bar 
1 Gallon Refill of Detail Spray 
Refill Funnel 
Porter Cable D/A Polisher 
Swirl & Haze Remover 
Both polishing pads and D/A adapter 
Brilliant Spray Glaze 
Revive Polish 
Buttery Wax 
Four Microfiber Polish & Wax Applicator Pads 
Vinyl, Rubber, & Tire Dressing 
Leather Conditioner 
Four Detail Sponges for Dressings 
In & Out Spray 
Four Super Plush Microfiber Polishing Towels 
Instructional Detailing DVD"
Products:Car Care
""PC Essentials Detail Kit - "The word, Essentials, didnt fit, so we upgraded our most popular kit. We bumped the Detail Spray Refill from 1/2 Gallon to one full Gallon. We added the Grit Guard Bucket Insert, and upgraded the towels from 3 to 4 of our Brand New Ultra Plush Microfiber Polishing Towels. We also bumped the applicator and detail sponge count to four. This kit, if purchased seperately, would cost $459. If you are looking to take vehicle care seriously, here is where to start.
 
 
Clear 4.25 Gallon Bucket
Screw-Top Sealed Bucket Lid
Detail Spray 
Clay Bar 
1 Gallon Refill of Detail Spray 
Refill Funnel 
Porter Cable D/A Polisher 
Swirl & Haze Remover 
Both polishing pads and D/A adapter 
Brilliant Spray Glaze 
Revive Polish 
Buttery Wax 
Four Microfiber Polish & Wax Applicator Pads 
Vinyl, Rubber, & Tire Dressing 
Leather Conditioner 
Four Detail Sponges for Dressings 
In & Out Spray 
Four Super Plush Microfiber Polishing Towels 
Instructional Detailing DVD"
Products:Car Care
""PIAA 1100* Driving / Fog Lamps - "Available In Super White Driving 
Bulb Type 12V - Dichroic 55watt=85watt Super White 
Features Silver PPS housing and chrome plated aluminum trim ring 
Kit Includes Two lamps, wiring harness, relay, and switch"
Products:Lighting
""Pro-Torque 97-03 C5 Torque Converter - "97-03 Pro-Torque Torque Converter With a .6 sec improvement in the 1/4 mile and a 2.4 mph increase in the trap speed, the Pro-Torque Torque Converter is one of the most cost effective modifications available for the A4 (automatic) C5 Corvette. This translates to a 24 HP improvement at the flywheel, which is a result of the torque converters effective ability to transfer more power to the wheels quicker. Installation is approx. 6 hrs."
Products:Torque Converters
""Real Absolute Essentials Kit - "We are happy to introduce the new, improved, and updated Absolute Essentials Kit. This kit contains all of the products included in the Essentials Kit, plus a few of the Absolute Essentials: a Gallon Refill of our best selling Detail Spray, In & Out Spray, Leather Conditioner, Leather & Interior Cleaner, Undercarriage Spray, and Glass Cleaner. We also include 3 Super Plush Microfiber Polishing Towels, Applicator Pads, and Detail Sponges, a Grit Guard bucket insert, Firehose Spray Nozzle, and Double-Sided Foam Wash Pad.   Detailing enthusiasts who start with the Essentials Kit typically come back for these ‘Absolute Essentials’ within weeks, which is why we designed this kit, and named is such.   The Absolute Essentials would add up to over $340.00 if purchased separately.  Save over $50 with this Kit!  

 

Note: The Absolute Essentials is designed for Hand Detailing customers, and does not include Machine Polishing products.

 
Adam’s Absolute Essentials Kit Includes:
 
Clear 4.25 Gallon Detail Bucket 
Screw-Top Sealed Bucket Lid 
16oz All-Purpose Cleaner 
12oz Car Wash 
16oz Detail Spray 
12oz Vinyl, Rubber, & Tire Protectant (VRT) 
12oz Revive Polish 
12oz Swirl & Haze Remover 
12oz Buttery Wax 
16oz Glass Cleaner 
16oz Leather & Interior Cleaner 
16oz Undercarriage Spray 
12oz Leather Conditioner 
In & Out Spray 
One Gallon Detail Spray refill 
4oz Clay Bar 
Three Super Plush Microfiber Polishing Towels 
Three Super Plush Microfiber Polish and Wax Applicators 
Three Detail Sponges 
Foam Wash Pad 
Synthetic Wash Pad 
Fire-hose Spray Nozzle 
Grit Guard Bucket Insert 
Jumbo Microfiber Waffle-Weave Microfiber Drying Towel 
Detailed Step by Step Instructional DVD 
Laminated Detailing Reference Card"
Products:Car Care
""Real Absolute Essentials Kit - "We are happy to introduce the new, improved, and updated Absolute Essentials Kit. This kit contains all of the products included in the Essentials Kit, plus a few of the Absolute Essentials: a Gallon Refill of our best selling Detail Spray, In & Out Spray, Leather Conditioner, Leather & Interior Cleaner, Undercarriage Spray, and Glass Cleaner. We also include 3 Super Plush Microfiber Polishing Towels, Applicator Pads, and Detail Sponges, a Grit Guard bucket insert, Firehose Spray Nozzle, and Double-Sided Foam Wash Pad.   Detailing enthusiasts who start with the Essentials Kit typically come back for these ‘Absolute Essentials’ within weeks, which is why we designed this kit, and named is such.   The Absolute Essentials would add up to over $340.00 if purchased separately.  Save over $50 with this Kit!  

 

Note: The Absolute Essentials is designed for Hand Detailing customers, and does not include Machine Polishing products.

 
Adam’s Absolute Essentials Kit Includes:
 
Clear 4.25 Gallon Detail Bucket 
Screw-Top Sealed Bucket Lid 
16oz All-Purpose Cleaner 
12oz Car Wash 
16oz Detail Spray 
12oz Vinyl, Rubber, & Tire Protectant (VRT) 
12oz Revive Polish 
12oz Swirl & Haze Remover 
12oz Buttery Wax 
16oz Glass Cleaner 
16oz Leather & Interior Cleaner 
16oz Undercarriage Spray 
12oz Leather Conditioner 
In & Out Spray 
One Gallon Detail Spray refill 
4oz Clay Bar 
Three Super Plush Microfiber Polishing Towels 
Three Super Plush Microfiber Polish and Wax Applicators 
Three Detail Sponges 
Foam Wash Pad 
Synthetic Wash Pad 
Fire-hose Spray Nozzle 
Grit Guard Bucket Insert 
Jumbo Microfiber Waffle-Weave Microfiber Drying Towel 
Detailed Step by Step Instructional DVD 
Laminated Detailing Reference Card"
Products:Car Care
""Recalibrated and relocated MAT Sensor-Fits 97-98 C5 - "APPROXIMATE SHIPPING CHARGE: $5.00-$8.50 (DEPENDING ON QUANTITIES ORDERED) 
Our recalibrated and relocated MAT Sensor (Item#100-217) replaces the original MAT Sensor. First unplug your original MAT sensor, leave it in place. Next looses the clamps that hold the air tube to the Mass sensor and throttle body and remove the air tube. At this point locate your original sensor now look at the opposite end and opposite side you will find another area that could support a grommet and sensor. There is a section at this end that was designed to accept another MAT sensor. Drill a 7/16 hole in the center of the flat section and insert the grommet provided in the kit. Now insert the new MAT sensor into the grommet and the other end into the electrical connector. This recalibrated MAT Sensor changes the reading of your air temperature thus providing an optimum timing curve and an increase in total timing. MAKE SURE THE ELECTRICAL CONNECTION IS SNUG. NOTE: Our Recalibrated MAT Sensor is designed to fluctuate with the air temperature, just like your factory unit. Horsepower gains have showed an increase of 5 to 8 Horsepower. High grade fuel required."
Products:Computer Tuning
""Red Line COMPLETE FUEL SYSTEM CLEANER - "COMPLETE FUEL SYSTEM CLEANER is a concentrated package of the most powerful high-temperature detergents available to clean gasoline fuel injectors and intake valves. Complete Fuel System Cleaner can clean injectors to nearly 100% efficiency in one treatment. The cleansing effect on injector deposits can raise fuel economy approximately 12% or even greater, depending on the condition of the injectors. Although many gasolines advertise injector cleanliness, GM presented a paper to the SAE which indicates that their customers encountered injector plugging with all major brands of gasoline (SAE 861533). Complete Fuel System Cleaner contains detergents and a synthetic upper cylinder lubricant which will help clean the intake valves, pollution control valves, combustion chamber deposits and carburetors. Complete Fuel System Cleaner also protects the fuel system from rust. One bottle treats up to 100 gallons. Safe for continual use."
Products:Red-Line Products
""Red Line SYNTHETIC ATF - D4 ATF - "D4 ATF - synthetic Dexron III and Mercon fluid meeting the requirements of most transmission manufacturers, while satisfying GL-4 gear oil requirements. Superior stability allows high-temperature operation without varnishing valves and clutches. Also provides tremendously improved shifting in cold weather. The best low-temperature shiftability for manual transmissions and transaxles which require ATFs"
Products:Red-Line Products
""Red Line Synthetic Engine Oils - "While Red Line Synthetic Engine Oils are derived from our Race Oils and are used by many racers, they were formulated specifically for street use in all kinds of passenger cars and light, medium and heavy trucks. Red Line Engine Oils outperform all petroleum-based oils and all other synthetics on the market today. Our Engine Oils are designed to provide highest performance, best durability, ultimate protection and outstanding cleanliness along with lowest friction to your automotive, motorcycle, marine or stationary engine running on gasoline, diesel, alcohol or natural gas fuel. At Red Line, we use the most stable synthetic lubricant base stocks available and formulate our products for wear protection and friction reduction across a wide range of engine operating conditions. Red Line lubricants are unique because they contain polyester base stocks, the only lubricant base stock type that withstands the incredible heat present in the hot sections of jet engines. This high-temperature stability makes Red Line Engine Oils a necessity for proper lubrication of high-performance engines, turbo-charged engines, heavily loaded truck engines or any engine that runs high engine oil temperature. Red Line is not just for high-performance and racing. Ordinary cars and trucks that see daily driver duty benefit greatly when their engines are lubricated with Red Line engine oils. More performance, better fuel economy and increased durability come with use of our oils in daily drivers. Because of the robust polyester base stock and high-performance anticorrosive additive package in Red Line oils, they are ideal for use in street-driven vehicles at extended drain intervals. Red Line recommends oil changes for engines that are in good condition and do not see frequent starts without warm-ups or short-trips at between 10,000 and 18,000 miles for gasoline engines, 10,000 and 12,000 miles for diesel engines, or every 12 months, whichever is shorter. Red Line 5W30: Provides the quickest starts and fastest oil pressure rise. Will reduce turbo lag and provides more power and best economy in an engine in good condition. Replacement for OE factory-fill oils in passenger cars and most light trucks. Thicker oil film at operating temperature than a petroleum 10W-40. Best choice for engines operated in extreme cold weather. Red Line 10W30: Best all-weather viscosity grade for gasoline engines in cars and light trucks that are driven on the street on a daily basis. Reduces turbo lag and provides more power and economy while providing thicker bearing oil films at operating temperature than a petroleum 10W-40. Best all-round, synthetic oil for stock or slightly modified engines in high- performance cars that are street-driven. Best choice to replace a 5W-30 or 10W-30, petroleum-based or other-brand synthetic oil if maximum durability is preferred. Acceptable for engines that are occasionally operated in extreme cold weather. Red Line 10W40: Best choice for engines that typically run high oil temperature. Best choice for engines in daily drivers operated in very hot weather on a regular basis. Best choice for medium and heavy duty gasoline engines in trucks. Best choice for high-performance engines that see street as well as frequent racetrack duty. Thicker oil film at operating temperature than a petro-based 20W-50. Red Line 15W50 & 20W50: The ultimate high-temperature protection in Red Line engine oils recommended for street use. Good for engines that regularly run very high oil temperatures. Best for engines that run large clearances such as air-cooled engines or large-displacement, all-out racing engines that see occasional street use. Provides 25% more viscosity in bearings than petroleum 20W-50s. Not recommended for use in cold climates where temperatures are at or below 10�F or -12�C. Not recommended for street use in production engines that see sustained oil temperatures below 225�F. Those engines should use Red Line 10W-30 or 10W-40. LAPD only accepts Visa and Mastercard. No American Express is accepted."
Products:Red-Line Products
""Red Line Water Wetter Supercoolant - "Water Wetter Supercoolant is a unique wetting agent for cooling systems which reduces coolant temperatures by as much as 30�F. This liquid product can be used to provide rust and corrosion protection in plain water for racing engines, which provides much better heat transfer properties than glycol-based antifreeze. Or it can be added to new or used antifreeze to improve the heat transfer of ethylene and propylene glycol systems. Designed for modern aluminum, cast iron, copper, brass, and bronze systems."
Products:Red-Line Products
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] 
[16] 17 [18] [19] [20] 

 

Search



""Vararam C6 Snake Charmer Cold Air Intake Kit - "After 1 full year of R&D the all new C-6 Snake charmer ram air induction kit is finally ready for the street. The snake charmer is a heavy development of the original C-5 B2 unit. We used information gathered from 12 special B2 Race units that we constructed for racing only, these units featured many different internal aerodynamic packages and filter combinations, to maximize peak CFM and time to peak manifold pressure. We have emphasized too many customers and racing teams that it?s not just peak pressure but the time to peak manifold pressure that we look at, this occurs at shift recovery, down in the meat of the power curve. This helps for shooting off of corners, general drivability and overall peak performance, this shows up in the form of Torque& Lots of it. Like all VR units the snake charmer was not designed for dynoing (pulling air) it was designed for ramming as such the aero package and shape of the unit are designed around this. The philosophy is simple; design for the most efficient aero package possible at all speeds ranging from 10mph- 180mph. The snake charmer is over 108%-123% efficient depending on the filter used.

The Filter: The filter for this unit was custom designed in house and produced by a subcontractor for Donaldson. It is a pleated unit that is washable and reusable, but that is where all similarities end, the filter features deeper pleats and more pleats per inch than other filters and the peaks and valleys have been opened to further increase flow capacity per sq inch. The end result is a very compact high flow filter that will out flow K&N?s of similar dimension by over 30% while actually giving better air filtration, you simply have more filter area that is effective area not dead space. We used the latest in fluid dynamic software to check the flow path of the snake charmer; we say check because the snake charmer was originally designed by hand by company president Patrick Ledford. The flow is so well balanced into the mass airflow meter that at full speed 180mph+ the airflow is within 1mph across the entire circumference of the entrance leading into the air meter, the factory tube isn?t that good!

Rainwater will not affect this unit, nor will down pours, you will have to submerse the nose of the car.

Construction: The unit is formed using two construction processes, the upper is roto molded to ensure a seamless internal aero package leading into the air meter. The second, the lower scoop is vacuum formed, this has been done to allow us to alter the scoop and its aero-packages to suit specific applications, giving us more flexibility and performance in street or racing use. This ensures maximum performance at all times.

How much power will you get? So now the how much power will you get question- standing on a dyno without using any special programming you should expect 10-15hp from any cold air kit,but once moving the VR will put all the lost MAP pressure back into the plenum yielding another 17hp by 60mph 19-20by 90-100mph and the way we rate our kits is through a ? mile Your total power through a ? mile is about another 22hp plus the dyno hp of 10-15hp,so, on the low side, 32 Rear wheel hp, high side 37 Rear wheel hp. That?s 39- 42hp at the fly wheel through a ? mile. This power shows up in the testing performance of the unit where we see gains of the fallowing,.

3.5 -4 tenths off the ? mile +3.5-4mph+ added to the ? mile trap speeds +7-10MPH to the cars top speed

That is serious performance considering that is right out of the box, we will continue development for further performance, but we have maximized the factory programming so more may be possible with custom tuning and we are working with tuners and racing teams now on such programs, so look for these in the future with a VR program or upgrading to a VR programmer if you already own one such a programmer."
Vararam C6 Snake Charmer Cold Air Intake Kit
$439.95
$339.00
Save: 23% off