Home | Login | Register
DEPARTMENTS
- CORVETTE C5/Z06
- CORVETTE C6/Z06
- GTO
- Specials
- New Products
- Featured Products
- All Products

INFORMATION
- Shipping & Returns
- Contact Us
- Subscribe to Newsletter
- Tell A Friend

 
Home
 
All Products
""X Pipe - "Borla Performance Industries once again proves why we’ve led the aftermarket performance exhaust industry for over 26 years. BORLA has an exalted heritage with Chevrolet performance vehicles. From the C5R LeMans Winning Corvettes to privateers like KTEC, Pratt-Miller, Lingenfelter and Lou Gigliotti who have enhanced BORLA’s knowledge of both the vehicle dynamics and power-plant engineering. The new C6 is a muscle car with a big, powerful engine and sophisticated sexy chassis. BORLA has always used the transfer of technology from racing to the street as a tool, and the C6 plays right into that wheelhouse. With an experienced R&D staff, the BORLA team gave the Chevrolet mark the attention it deserves, rolling out several new system options. Airflow management and exhaust engineering is a science with which BORLA has more experience than anyone in the exhaust aftermarket. Our Part #140128 is a true dual Cat-Back™ system employing now famous BORLA “S” Style race-bred 5” diameter straight-through mufflers that feed two 5” round, rolled edge, angle-cut tips on each outlet. Make no mistake, this is an aggressive exhaust, proclaiming loud and clear that 400+ horses are ready to stampede under this hood. #140128 is a full 14 pounds lighter than the stock system, includes the famous Borla X-pipe (also sold separately as Part #60089) after the factory cats and flows a full 300cfm more than the factory system which, as most engine builders will confirm, accounts for the significant power improvements. Perhaps more importantly, this flow will also maximize other performance enhancements because each BORLA exhaust is tuned to get peak output from any aftermarket performance upgrade. Weight Comparisons: Stock Cat-Back™ Exhaust (w/ h-pipe)…………………..…58 Lbs. Borla S Type Cat-Back™ (w/ X-pipe)……………44 Lbs. Rear Sections Only Stock rear section…………………………….. 40 Lbs. Borla S Type rear section……………..……….29 Lbs. We saw a 10-15 hp gain with our S-Type rear section and a few more with our X-pipe. The full S-Type Cat-Back™ system with the X-pipe should consistently get 12-15hp on a stock C6 but can also get 18+ hp depending on the conditions. Please note a number of variables affect the horsepower delta with dynomometers . In addition to the quad round-tip system, BORLA also offer boths a quad oval-tip system (#140131) and a dual rectangular-tip system (#140133). All three systems shout American V8 here and can’t help but be noticed. Borla Performance Industries, the original pioneers of aerospace-grade T-304 stainless steel (superior to 409 or aluminized steel) free-flow exhaust utilizes patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy — all with an easy bolt-on installation. All BORLA street products carry an unsurpassed written million-mile warranty."
Products:Borla Performance
""Yank C5 Torque Converters - "Allow 3-4 weeks for delivery from time order is placed. 5th Generation Corvettes (especially 99 and newer models) have sophisticated electronics to properly control the rear mounted transaxle assembly. Yank Converters recognizes this and has taken extra effort to build torque converters with special tolerances to cut down or eliminate SES lights from occurring. Special clutches and clutch material, along with a specially reinforced billet cover allow Yank Converters to work in harmony with the factory PCMs. The proprietary components make the C-5 converters a little more expensive to build than our other converters, but after seeing what a C-5 converter swap costs, youll definitely appreciate only needing to install your Yank Converter ONCE!"
Products:Torque Converters
""Yank Hydra-Matic 4L60-E High Performance Transmission - "The Pro Yank transmission can withstand up to 700 lb. ft. of torque! (compared to 450 lb. ft. stock) The Yank Sportsman Pro transmission can handle up to 600 lb. ft. of torque All 4L60E transmissions have extra clutches and exotic materials for maximum holding power while using power adders. The Pro Yank transmissions will shorten shift cycle time in half. This will decrease ET by at least 1 tenth! Trans-brake applications are available, however an appropriately beefy rear end is recommended!"
Products:Transmission
""Z06 Chrome Wheels 18" All Around - "Wheel sizes are as follows, Front: 18x9.5 Rear: 18x10.5 PRICE INCLUDES CENTERCAPS, LUGNUT COVERS AND COLOR CENTERCAP C5 CROSSFLAGS. OUR WHEELS ARE AMERICAN MADE AND ARE BACKED BY A LIFETIME WARRANTY ON THE STRUCTURE AND A 3 YEAR WARRANTY ON THE CHROME PLATING."
Products:Wheels & Tires
""Z06 Chrome Wheels C5 Stock Sizes/Z06 Stock Sizes - "PRICE INCLUDES CENTERCAPS, LUGNUT COVERS AND COLOR CENTERCAP C5 CROSSFLAGS. OUR WHEELS ARE AMERICAN MADE AND ARE BACKED BY A LIFETIME WARRANTY ON THE STRUCTURE AND A 3 YEAR WARRANTY ON THE CHROME PLATING."
Products:Wheels & Tires
""Z06 Style Front Brake Cooling Duct Screens - "A great way to dress up your C5/Z06 and set it apart from all the others on the road. These are not the GM Z06 screens that you see on this vehicle. What we have is the screens that are fitted in the front brake cooling ducts that are just below the Z06 screens. Very easy to install. Typical installation time is 30 minutes. Comes with fully illustrated instructions. Priced per pair. CLICK HERE FOR: Z06 STYLE FRONT BRAKE COOLING DUCT SCREEN INSTALL INSTRUCTIONS"
Products:ZO6 Style Screens
""Z06 Style Rear Exhaust Vent Screens - "A great way to dress up your C5/Z06 and set it apart from all the others on the road. These Z06 Style Rear Exhaust Vent Screens will match the GM front air screens, GM rear brake cooling duct screens, our exclusive front brake cooling duct screens and side fender screens. Make your car look like no other Corvette on the road with these autocross style rear exhaust vent screens. Installation time is: 30 minutes. Screens come with full installation instructions. Priced per pair! CLICK HERE FOR: Z06 STYLE REAR VENT SCREEN INSTALL INSTRUCTIONS"
Products:ZO6 Style Screens
""Z06 Tire Inflator Compressor Kit - "Standard found on all Z06 Corvettes is this GM tire inflator compressor kit. This kit is intended for those C5 owners that have removed their run-flat tires for non-run flat tires and want the peace of mind of not being stranded in the event of a flat tire. The kit consists of a squeeze bottle filled with a non-inflammable latex compound in an aqueous base, a nozzle that attaches to the tire valve, and a mini-air compressor with a 12-volt adapter that plugs into the cars accessory power outlet. The kit functions safely in temperatures ranging from -20o to 140o F, under wet or dry conditions, and is easy, fast and clean to use. Similar inflator kits are successfully used by Mercedes and BMW, and Corvettes sold in Japan have been using this inflator kit since the introduction of the C5 in 1997."
Products:Wheels & Tires
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] 
[16] [17] [18] [19] 20 

 
Search

""Filter Mag / RA Series - "RA300 Filter size range: 2.90-3.20 RA Series Hi-Performance, Large Diesel, Racing, Heavy Duty Auto For 2.90 to 5.50 diameter standard oil filters The RA Series of FilterMAG™ can be used for both standard and Hi-Performance engines. This baby is built for the demanding needs of large diesel trucks, racing, and heavy duty applications. The RA Series provides extra power where its needed most."
Filter Mag / RA Series
$69.99
$59.99
Save: 14% off