Home | Login | Register
DEPARTMENTS
- CORVETTE C5/Z06
- CORVETTE C6/Z06
- GTO
- Specials
- New Products
- Featured Products
- All Products

INFORMATION
- Shipping & Returns
- Contact Us
- Subscribe to Newsletter
- Tell A Friend

 
Home
 
All Products
""C6 Carbon Fiber Door Handles - "Set your 2005-2009 C6 or Z06 apart from the rest with SLPs OEM quality Carbon Fiber Finish door grips. Theyre easily installed and really enhance the appearance of the Corvettes already tough image. Includes detailed installation instructions. "
Products:Accessories
""C6 Front Bumper Emblem - "This emblem is a direct replacements for your front bumper. The emblem simply sticks into place the way it came from the factory."
Products:Decals/Emblems
""C6 Front Floor Mat Set - "Lloyds floor mats for the 2005 C6. These are the same quaility mats of the C5 floormats but designed for the C6. Mats are available in the Cashmere, Ebony ,Victory Red and Steel Grey colors."
Products:Lloyd Floor Mats
""C6 Harness Mount Bar - "The C6 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev. MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The C6 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the drivers shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way. Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. <br> <br> Material: Type 304, stainless steel. Finish: Powdercoated in durable black wrinkle-finish Weight: 17.3 lbs. Models: ‘05+ C6 Coupes and ‘06+ Z06 Coupes Installation: Bar attaches to factory mounting points in B pillars."
Products:Brey-Krause Products
""C6 Lap Belt Mount Kit - "Material: 304 Stainless Steel Finish: Satin finish stainless steel. Weight: 1.6 lbs. Models: ‘05+ C6 Coupes and ‘06+ Z06 Coupes Installation: Secure snap-in belts to factory seat belt mounting points. Miscellaneous: One kit required per vehicle. One kit works for both passenger and driver seats in C6. Will not disable use of factory belts."
Products:Brey-Krause Products
""C6 LAPD Billet Triple Carbon Clutch - "The Ultimate high RPM, MONSTER POWER street and race triple disc clutch. Of course this uses LAPDs innovative strapless cover design and patented, non-warping carbon floater system as well as a fully CNCd lightweight billet steel flywheel. If you have up to 1,400 rwhp, then this is the only clutch for you!! This clutch has carbon on both sides of all three discs, both floaters, as well as carbon in the flywheel and pressure plate. Weight: 36 lbs. NOTE: This clutch kit is fully rebuildable. "
Products:Transmission
""C6 LAPD LSX BC2 (Billet Carbon Twin) Clutch - "This LAPD LSX BC2 (Billet Carbon Twin) is one impressive piece of engineering. We replace the OE style steel clutch cover with our strapless billet aluminum cover and our patented billet pressure ring with carbon inserts. Our new strapless cover is great for high RPM (7000+ ) drag and road racing applications along with heavy street use engines producing up to 900 rwhp. Aluminum weight: 25 lbs. Steel weight: 32 lbs. NOTE: This clutch kit is fully rebuildable. "
Products:Transmission
""C6 LAPD Single Carbon Lite Clutch - "The LAPD Single Carbon Lite clutch is specifically engineered for LS-powered Corvettes, GTOs and F-Body cars. This clutch kit comes complete with a CYN-R-G billet aluminum segmented flywheel, upgraded pressure plate with a light weight aluminum pressure ring and unique sprung hub twin friction clutch disc. All of the friction surfaces use RPSs own carbon-carbon material which is one of the finest friction materials made in the world. This material will never glaze or melt, it is very smooth to drive and has a very long service life. This clutch and flywheel kit is ideal for cars with up to 600 rwhp. This unit is very light with a total weight of only 28 lbs. which makes it great for Street use and Road racing. NOTE: This clutch kit is fully rebuildable. "
Products:Transmission
""C6 LAPD Street Twin Carbon Clutch - "The LAPD Street Twin Carbon clutch and flywheel kit comes complete with a billet steel flywheel, a special 10.5 steel pressure plate, RPSs patented carbon floater plate and two half carbon discs. RPSs patented carbon floater will not warp like all other steel floater plates. If the clutch you are looking to buy has a steel floater, beware!! A warped floater plate greatly reduces the life of the clutch and causes it to chatter on takeoff. Real carbon-carbon friction material was designed by the Military to only rub against itself. Again if the clutch you are looking at has carbon rubbing against steel, beware!! The discs in RPSs Street Twin Carbon clutch have carbon on the floater side (as God, or in this case the Military intended) and high grade organic material on the pressure plate and flywheel side. This combination allows for unparalleled performance for the cost. This clutch kit is recommended for heavy Street use with engines producing up to 800 rwhp. Weight: 39 lbs. NOTE: This clutch kit is fully rebuildable. "
Products:Transmission
""C6 LAPD Street Twin Lite Clutch - "The LAPD Street Twin Lite clutch and flywheel kit is the next step in twin disc technology. With this clutch, RPS replaces the standard steel pressure ring in the clutch cover with a billet aluminum piece that reduces the weight by 7 pounds. Also since no friction disc can rub directly against aluminum, RPS installs a carbon-carbon facing onto the pressure ring and both sides of the outer clutch disc. This clutch is recommended for heavy Street use and some Track use with engines producing up to 800 rwhp. Weight 32 lbs. NOTE: This clutch kit is fully rebuildable. "
Products:Transmission
""C6 Rear Bumper Emlem - "This is a direct replacement for your rear bumper emblem. The emblem attaches just like the one from the factory."
Products:Decals/Emblems
""C6 ROUTE 66 EVOLUTION SYSTEM - "The Route 66 system has a very distinctive muscle car idle note that emits a true touring performance sound on the highway and will garner an additional 11 rear wheel horsepower on your C6."
Products:B&B
""C6 ROUTE 66 SYSTEM - "The Route 66 system has a very distinctive muscle car idle note that emits a true touring performance sound on the highway and will garner an additional 11 rear wheel horsepower on your C6."
Products:B&B
""C6 Z06 Spyder Wheels - "Colors: chrome, gloss black, competition grey Note: prices may vary Sizes: 17x8.5 18x8.5 18x9.5 19x10 19x12"
Products:Factory Replica Wheels
""C6 ZO6 FUSION EXHAUST - "Billy Boat has combined the best of the Bullet exhaust with the best technology from the factory to give you the Z06 Fusion System for your Corvette. Utilizing the same exhaust control valve as the factory system, you get a Dr. Jekyll cruising sound, and release the Mr. Hyde Bullet sound when you want!"
Products:B&B
""C6/z06 Carbon Fiber Rear Spoiler - "Set your 2005-09 C6 or Z06 Corvette apart from the crowd with the SLP Carbon Fiber Finished Rear CHMSL housing. SLPs housing is easily installed and really enhances the appearance of the Corvettes already tough image. Includes a new rear CHMSL housing, along with all hardware and detailed installation instructions. "
Products:Accessories
""CAR WASH - "EVERY WENSDAY & FRIDAY ...MOBLIE DETAILER , HELL COME TO YOU OR THE SHOP ... CALL FOR DETAILS !!"
Products:Car Care
""CAR WASH - "EVERY WENSDAY & FRIDAY ...MOBLIE DETAILER , HELL COME TO YOU OR THE SHOP ... CALL FOR DETAILS !!"
Products:Car Care
[1] [2] [3] [4] [5] [6] 7 [8] [9] [10] [11] [12] [13] [14] [15] 
[16] [17] [18] [19] [20] 

 
Search

""Vararam C6 Snake Charmer Cold Air Intake Kit - "After 1 full year of R&D the all new C-6 Snake charmer ram air induction kit is finally ready for the street. The snake charmer is a heavy development of the original C-5 B2 unit. We used information gathered from 12 special B2 Race units that we constructed for racing only, these units featured many different internal aerodynamic packages and filter combinations, to maximize peak CFM and time to peak manifold pressure. We have emphasized too many customers and racing teams that it?s not just peak pressure but the time to peak manifold pressure that we look at, this occurs at shift recovery, down in the meat of the power curve. This helps for shooting off of corners, general drivability and overall peak performance, this shows up in the form of Torque& Lots of it. Like all VR units the snake charmer was not designed for dynoing (pulling air) it was designed for ramming as such the aero package and shape of the unit are designed around this. The philosophy is simple; design for the most efficient aero package possible at all speeds ranging from 10mph- 180mph. The snake charmer is over 108%-123% efficient depending on the filter used. The Filter: The filter for this unit was custom designed in house and produced by a subcontractor for Donaldson. It is a pleated unit that is washable and reusable, but that is where all similarities end, the filter features deeper pleats and more pleats per inch than other filters and the peaks and valleys have been opened to further increase flow capacity per sq inch. The end result is a very compact high flow filter that will out flow K&N?s of similar dimension by over 30% while actually giving better air filtration, you simply have more filter area that is effective area not dead space. We used the latest in fluid dynamic software to check the flow path of the snake charmer; we say check because the snake charmer was originally designed by hand by company president Patrick Ledford. The flow is so well balanced into the mass airflow meter that at full speed 180mph+ the airflow is within 1mph across the entire circumference of the entrance leading into the air meter, the factory tube isn?t that good! Rainwater will not affect this unit, nor will down pours, you will have to submerse the nose of the car. Construction: The unit is formed using two construction processes, the upper is roto molded to ensure a seamless internal aero package leading into the air meter. The second, the lower scoop is vacuum formed, this has been done to allow us to alter the scoop and its aero-packages to suit specific applications, giving us more flexibility and performance in street or racing use. This ensures maximum performance at all times. How much power will you get? So now the how much power will you get question- standing on a dyno without using any special programming you should expect 10-15hp from any cold air kit,but once moving the VR will put all the lost MAP pressure back into the plenum yielding another 17hp by 60mph 19-20by 90-100mph and the way we rate our kits is through a ? mile Your total power through a ? mile is about another 22hp plus the dyno hp of 10-15hp,so, on the low side, 32 Rear wheel hp, high side 37 Rear wheel hp. That?s 39- 42hp at the fly wheel through a ? mile. This power shows up in the testing performance of the unit where we see gains of the fallowing,. 3.5 -4 tenths off the ? mile +3.5-4mph+ added to the ? mile trap speeds +7-10MPH to the cars top speed That is serious performance considering that is right out of the box, we will continue development for further performance, but we have maximized the factory programming so more may be possible with custom tuning and we are working with tuners and racing teams now on such programs, so look for these in the future with a VR program or upgrading to a VR programmer if you already own one such a programmer."
Vararam C6 Snake Charmer Cold Air Intake Kit
$439.95
$339.00
Save: 23% off